4*10/100Base-TX + 1*100Base-FX SFP Industrial Ethernet Switch
SY-IS3005F-1FX4TX
Overview
The SY-IS3005F-1FX4TX is the unmanaged industrial grade Ethernet switch with 4-port 10/100Base-TX RJ45 and 2-port 100Base-FX fiber optical interfaces. It is featuring with port isolation, flow control, QoS(1-2 ports) and broadcast storm restrain function, which all can be configured by the Dip switch on the top panel.
SY-IS3005F-1FX4TX is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory,transportation, oil & gas, chemical,IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
Features
➢ 4*10/100Base-TX RJ45 ports, 2*100Base-FX SFP fiber ports
➢ DC12~58V input, redundant powersupply with polarity reverse/over-voltage protection
➢ Dip switch function: 1.Port isolation; 2. Flow control; 3. QoS; 4. Broadcast storm restrain
➢ Support 9K Bytes Jumbo frame
➢ Support4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less andDin-rail hardware design
Specification
|
Model No. |
SY-IS3005F-1FX4TX |
|||
|
Interface |
Fiber ports |
Copper RJ45 ports |
||
|
1 |
4 |
|||
|
Ethernet |
4*10/100Base-TX RJ45 1*100Base-FX SFP |
|||
|
Standard |
IEEE 802.310Base-TEthernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet |
|||
|
Dip Switch |
1. Port Isolation 2. Flow control 3. QoS(1-2 ports） 4. Broadcast storm restrain |
|||
|
LED Indicators |
P(Power indicator)Green |
Off: the device is power off or failed |
||
|
On: the device power on is normal |
||||
|
S(System indicator) Red |
Off:thechip is normal |
|||
|
On:the chip read/write is unnormal |
||||
|
1-4(Copper ports) |
Green indicators |
Yellow indicators |
||
|
Off: ports link down |
Off:port speed is 10M |
|||
|
On: ports link up |
On: port speed is 100M |
|||
|
Blinking:data on TX/RX |
||||
|
5-6( Fiber ports)Green |
Off: ports link down |
|||
|
On: ports link up |
||||
|
Blinking:data on TX/RX |
||||
|
Power parameters |
||||
|
Input voltage |
12-58VDC, redundant power input |
|||
|
Input current |
0.5A Max |
|||
|
Total power consumption |
Full loading ≤3W |
|||
|
Connector |
Removable 4-pin terminal block |
|||
|
Reverse polarity protection |
Support |
|||
|
Over-voltage protection |
Support |
|||
|
Switching features |
||||
|
Switching capacity |
1G |
|||
|
Packet forwarding rate |
1.48 Mpps |
|||
|
MAC address table |
2K |
|||
|
VLAN |
2K |
|||
|
Buffer |
2Kbits |
|||
|
Forwarding delay |
<100us |
|||
|
Jumbo Frame |
Support 9Kbytes |
|||
|
MDX/MIDX |
Support |
|||
|
Watchdog |
Support |
|||
|
Network Topology |
||||
|
Star topology |
Support |
|||
|
Bus topology |
Support |
|||
|
Tree Topology |
Support |
|||
|
Mechanical structure |
||||
|
Case protection |
IP40 |
|||
|
Installation method |
Din-rail |
|||
|
Dimension(W*D*H)mm |
30*98*130mm |
|||
|
Weight |
0.55 kg |
|||
|
Operating environment |
||||
|
Operating temperature |
-40℃~+75℃ |
|||
|
Storage/transportation temperature |
-40℃~+85℃ |
|||
|
Relative humidity |
5%~95%（non-condensing） |
|||
|
Industrial Standard |
Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) |
|||
|
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) |
||||
|
DIP: IEC 61000-4-11 Level 3（10V） |
||||
|
ESD: IEC 61000-4-2 Level 4（8K/15K） |
||||
|
Shock：IEC 60068-2-27 |
||||
|
Free fall：IEC 60068-2-32 |
||||
|
Vibration：IEC 60068-2-6 |
||||
|
Certification |
CCC/CE/FCC/RoHS |
|||
|
Warranty |
5 years |
|||
|
Model |
Description |
|
SY-IS3005F-1FX4TX |
10/100Base-TX to 100Base-FX unmanaged industrial Ethernet switch with 4*10/100Base-TX RJ45 ports and 2*100Base-FXSFP slots,DC12-58V input, redundant dual power supply, Din-rail installation.Fiber ports transmission distance depending on the SFP module; Operation temperature: -40℃～+75℃ |