8*10/100/1000Base-T PoE + 2*1000Base-X SFP Industrial PoE Switch
SY-IS3010GP-2GX8GT
Overview
The SY-IS3010GP-2GX8GT are the unmanaged industrial grade PoE switches with 8-port 10/100/1000-T PoE and 2-port 1000Base-X fiber optical interfaces. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, they are also featuring with port isolation, 250m long distance transmission mode(1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
SY-IS3010GP-2GX8GT series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. They are the best choice for heavyindustrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
Features
➢ 8*10/100/1000Base-T RJ45 PoE ports, 2*1000Base-X SFP (/SC/ST/FC optional) ports
➢ DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog
➢ Support 10K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Specification
|
Model No. |
SY-IS3010GP-2GX8GT |
|||
|
Interface |
Fiber ports |
Copper RJ45 ports |
||
|
2 |
8 |
|||
|
Ethernet |
8*10/100/1000Base-T PoE 2*1000Base-X SFP(SC/ST/FC optional) |
|||
|
Standard |
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-over-Ethernet IEEE 802.3at Power-Over-Ethernet Plus PSE |
|||
|
Dip Switch |
1. Port Isolation 2. 250m long distance mode(1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog |
|||
|
LED Indicators |
P(Power indicator) Green |
Off: the device is power off or failed |
||
|
On: the device power on is normal |
||||
|
S(PoE usage indicator) Red |
Off: total PoE usage＜rated 50% |
|||
|
Blinking: rated 50%＜total PoE usage＜rated 90% |
||||
|
On: total PoE usage≥rated 90% |
||||
|
1-8(Copper ports) |
Greenindicators |
Yellow indicators |
||
|
Off: ports link down |
Off: PoE not working |
|||
|
On: ports link up |
On: PoE working |
|||
|
Blinking:data on TX/RX |
||||
|
9-10( Fiber ports)Green |
Off: ports link down |
|||
|
On: ports link up |
||||
|
Blinking:data on TX/RX |
||||
|
Power parameters |
||||
|
Input voltage |
44-57VDC, redundant power input |
|||
|
Input current |
5.6A Max |
|||
|
Total consumption |
Full loading without PoE ≤7.5W PoEpower budget≤240W |
|||
|
Connector |
Removable 4-pin terminal block |
|||
|
Reverse polarity protection |
Support |
|||
|
Over-voltage protection |
Support |
|||
|
Switching features |
||||
|
Switching capacity |
20G |
|||
|
Packet forwarding rate |
29.7 Mpps |
|||
|
MAC address table |
16K |
|||
|
VLAN |
4K |
|||
|
Buffer |
2M |
|||
|
Forwarding delay |
<5us |
|||
|
Jumbo Frame |
Support 10Kbytes |
|||
|
MDX/MIDX |
Support |
|||
|
Watchdog |
Support |
|||
|
Network Topology |
||||
|
Star topology |
Support |
|||
|
Bus topology |
Support |
|||
|
Tree Topology |
Support |
|||
|
Mechanical structure |
||||
|
Case protection |
IP40 |
|||
|
Installation method |
Din-rail |
|||
|
Dimension(W*D*H)mm |
48*98*130mm |
|||
|
Weight |
0.72 kg |
|||
|
Operating environment |
||||
|
Operating temperature |
-40℃~+75℃ |
|||
|
Storage/transportation temperature |
-40℃~+85℃ |
|||
|
Relative humidity |
5%~95%（non-condensing） |
|||
|
Industry standard |
Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) |
|||
|
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us)） |
||||
|
DIP: IEC 61000-4-11 Level 3（10V） |
||||
|
ESD: IEC 61000-4-2 Level 4（8K/15K） |
||||
|
Shock: IEC 60068-2-27 |
||||
|
Free fall: IEC 60068-2-32 |
||||
|
Vibration: IEC 60068-2-6 |
||||
|
Certification |
CCC/CE/FCC/RoHS |
|||
|
Warranty |
5 years |
|||
|
Model |
Description |
|
SY-IS3010GP-2GX8GT |
10/100/1000Base-T to 1000Base-X unmanaged industrial PoE switch with 8*10/100/1000Base-T PoE ports and 2*1000Base-X SFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Fiber port transmission distance depending on the SFP module; Operation temperature: -40℃～+75℃ |
|
SY-IS3010GP-2GX8GT-SC |
10/100/1000Base-T to 1000Base-X unmanaged industrial PoE switch with 8*10/100/1000Base-T PoE ports and 2*1000Base-X SC ports, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃～+75℃ |
|
SY-IS3010GP-2GX8GT-FC |
10/100/1000Base-T to 1000Base-X unmanaged industrial PoE switch with 8*10/100/1000Base-T PoE ports and 2*1000Base-X FC ports, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃～+75℃ |
|
SY-IS3010GP-2GX8GT-ST |
10/100/1000Base-T to 1000Base-X unmanaged industrial PoE switch with 8*10/100/1000Base-T PoE ports and 2*1000Base-X ST ports,complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃～+75℃ |