16*10/100/1000Base-T + 2*1G/2.5G/10GBase-X SFP+ Layer 3 Managed Industrial Ethernet Switch
:
:
Model
SY-IS6518XG-2XS16GT
Overview
The SY-IS6518XG-2XS16GT is the highly reliable Layer 3 managed industrial Ethernet switch with 16-port 10/100/1000-T RJ45 and 2-port 10GBase-X SFP+ interfaces. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. SY-IS6518XG-2XS16GT supports Layer 3 static routing & dynamic features and robust layer 2 management function, which can fulfill the special needs of industrial automation applications.
SY-IS6518XG-2XS16GT is also the high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*10/100/1000Base-T RJ45 ports, 2*1G/2.5G/10GBase-X SFP+ slots
➢ Redundant power 12-58V input with polarity reverse/over-voltage/over-current protection
➢ Support one digital output for relay alarm (terminal block Pin 5/6)
➢ Layer 3 feature: Support static routing and dynamic routing
➢ Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Specification
|
Model No. |
SY-IS6518XG-2XS16GT |
|
|
Interface |
Fiber ports |
Copper RJ45 ports |
|
2 |
16 |
|
|
Ethernet |
16*10/100/1000Base-T RJ45 2*1G/2.5G/10GBase-X SFP+ |
|
|
Management port |
1*RJ45 Console port |
|
|
Alarm port |
One digital output for relay alarm,alarm relay current carry ability: 1A@24VDC |
|
|
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gb/s Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP |
|
|
LED Indicators |
||
|
P(Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
|
S(System status indicator) |
Blinking: device initialization |
On: device on normal operation |
|
1-16 (Copper ports indicators)Green |
Off: ports link down |
|
|
On: ports link up |
||
|
Blinking:data on TX/RX |
||
|
1-16(Port speed indicators)Yellow |
Off:ports on 10/100M |
|
|
On:ports on 1000M |
||
|
17-18(Fiber ports indicators)Green |
Off: ports link down |
|
|
On: ports link up |
||
|
Blinking: data on TX/RX |
||
|
Power parameter |
||
|
Input voltage |
12-58VDC, redundant power input |
|
|
Input current |
1.5A Max |
|
|
Total power consumption |
Full loading ≤18W |
|
|
Connector |
Removable6-pin terminal block, Pin 5/6 for relay alarm output |
|
|
Reverse polarity protection |
Support |
|
|
Over-voltage protection |
Support |
|
|
Over-current protection |
Support |
|
|
Layer 2 function |
||
|
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support dynamic aggregation |
|
|
Port features |
Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage |
|
|
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|
|
VLAN Classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
|
|
QinQ |
Port-based QinQ VLAN-based QinQ Flow-based QinQ |
|
|
Port mirroring |
Many to one port mirroring |
|
|
Ring network protocol |
Support STP、RSTP、MSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms |
|
|
DHCP |
Support DHCP Client Support DHCP Snooping |
|
|
Multicast |
IGMP V1,V2,V3 IGMP snooping |
|
|
ACL |
IP Standard ACL MAC extend ACL IP extend ACL |
|
|
QoS |
Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS |
|
|
Security |
Support Dot1x，port authentication，MAC authentication，RADIUS service Support port-security Support IP Source Guard，IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation |
|
|
Management &maintenance |
Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping , TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading |
|
|
Layer 3 function |
||
|
ARP |
ARP table aging |
|
|
IPv4 / IPv6 |
Static routing |
|
|
ECMP |
ECMP; Support the configuration of ECMP Max next-hop; Supportcapacity balanced configuration; |
|
|
Route policy |
IPv4 prefix-list |
|
|
VRRP |
virtual router redundancy protocol |
|
|
Routing entry |
13K |
|
|
IP routing protocol |
RIPv1/v2; OSPFv2; BGP4; BGP supports Routing recursive ECMP; Support to view the number of neighbors and up/down state IS-ISv4 |
|
|
Switching features |
||
|
Switching capacity |
72Gbps |
|
|
Packet forwarding rate |
107.13Mpps |
|
|
MAC address table |
16K |
|
|
VLAN |
4K |
|
|
Buffer |
12Mbit |
|
|
Forwarding delay |
<5us |
|
|
Jumbo Frame |
Support 10Kbytes |
|
|
MDX/MIDX |
Support |
|
|
Watchdog |
Support |
|
|
Mechanical structure |
||
|
Case protection |
IP40 |
|
|
Installation method |
Din-rail |
|
|
Dimension(W*D*H)mm |
54*115*158mm |
|
|
Weight |
1.45 kg |
|
|
Operating environment |
||
|
Operating temperature |
-40℃~+75℃ |
|
|
Storage/transportation temperature |
-40℃~+85℃ |
|
|
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|
|
Industrial Standard |
||
|
EMS |
Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us） Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV（10/700us） RS：IEC 61000-4-3 80 MHz-1 GHz：10 V/m EFT：IEC 61000-4-4 4K/2K CS：IEC 61000-4-6 10V ESD：IEC 61000-4-2 Contact: 8K；Air: 15K |
|
|
EMI |
FCC Part 15B Class A |
|
|
Shock |
IEC 60068-2-27 |
|
|
Free fall |
IEC 60068-2-32 |
|
|
Vibration |
IEC 60068-2-6 |
|
|
Certification |
CCC/CE/FCC/RoHS |
|
|
Warranty |
5 years |
|
|
Model |
Description |
|
SY-IS6518XG-2XS16GT |
Layer 3 Managed industrial Ethernet switch with 16*10/100/1000Base-T RJ45 ports and 2*1G/2.5G/10GBase-XSFP+ slots, DC 12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |