8*10/100/1000Base-T PoE + 2*1G/2.5G/10GBase-X SFP+ Managed Industrial PoE Switch
SY-IS6210XGP-2XS8GT
Overview
The SY-IS6210XGP-2XS8GT is the highly reliable managed industrial PoE switch with 8-port 10/100/1000-T PoE and 2-port 10GBase-XSFP+ interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. SY-IS6210XGP-2XS8GT also supports robust layer 2 management function, which can fulfill the special needs of industrial automation applications.
SY-IS6210XGP-2XS8GT is a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 8*10/100/1000Base-T RJ45 PoE ports, 2*10GBase-X SFP+ slots
➢ Redundant power DC44-57V input with polarity reverse/over-voltage/over-current protection
➢ Complies with IEEE802.3af PoEand IEEE802.3at PoE+ standard
➢ Support one digital output for relay alarm(terminal block pin 5/6)
➢ Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,
MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/PoE management/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature:-40 ℃ ~+75℃
Specification
|
Model No. |
SY-IS6210XGP-2XS8GT |
|
|
Interface |
Fiber ports |
Copper RJ45 ports |
|
2 |
8 |
|
|
Ethernet |
8*10/100/1000Base-T RJ45 PoE 2*1G/2.5G/10GBase-X SFP+ |
|
|
Management port |
1*RJ45 Console port |
|
|
Alarm port |
One digital output for relay alarm, alarm relay current carry ability: 1A@24VDC |
|
|
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gb/s Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+ |
|
|
LED Indicators |
||
|
P(Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
|
S(System status indicator) |
Blinking: device initialization |
On: device on normal operation |
|
1-8 (Copper ports indicators)Green |
Off: ports link down |
|
|
On: ports link up |
||
|
Blinking:data on TX/RX |
||
|
1-8(PoE status indicators)Yellow |
Off: PoE not working |
|
|
On: PoE working |
||
|
9-10(Fiber ports indicators)Green |
Off: ports link down |
|
|
On: ports link up |
||
|
Blinking: data on TX/RX |
||
|
Power parameter |
||
|
Input voltage |
44-57VDC, redundant power input |
|
|
Input current |
5.7A Max |
|
|
Total power consumption |
Full loading without PoE ≤12W PoE power budget≤ 240W |
|
|
Connector |
Removable6-pin terminal block, Pin 5/6 for relay alarm output |
|
|
Reverse polarity protection |
Support |
|
|
Over-voltage protection |
Support |
|
|
Over-current protection |
Support |
|
|
Layer 2 function |
||
|
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support dynamic aggregation |
|
|
Port features |
Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage |
|
|
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|
|
VLAN Classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
|
|
QinQ |
Port-based QinQ VLAN-based QinQ Flow-based QinQ |
|
|
Port mirroring |
Many to one port mirroring |
|
|
Ring network protocol |
Support STP、RSTP、MSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms |
|
|
DHCP |
Support DHCP Client Support DHCP Snooping |
|
|
Multicast |
IGMP V1,V2,V3 IGMP snooping |
|
|
ACL |
IP Standard ACL MAC extend ACL IP extend ACL |
|
|
QoS |
Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS |
|
|
Security |
Support Dot1x，port authentication，MAC authentication，RADIUS service Support port-security Support IP Source Guard，IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation |
|
|
Management & maintenance |
Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping , TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support PoE management Support TFTP, web upgrading |
|
|
Switching features |
||
|
Switching capacity |
56Gbps |
|
|
Packet forwarding rate |
83.3Mpps |
|
|
MAC address table |
16K |
|
|
VLAN |
4K |
|
|
Buffer |
12Mbit |
|
|
Forwarding delay |
<5us |
|
|
Jumbo Frame |
Support 10Kbytes |
|
|
MDX/MIDX |
Support |
|
|
Watchdog |
Support |
|
|
Mechanical structure |
||
|
Case protection |
IP40 |
|
|
Installation method |
Din-rail |
|
|
Dimension(W*D*H)mm |
54*115*158mm |
|
|
Weight |
1.10 kg |
|
|
Operating environment |
||
|
Operating temperature |
-40℃~+75℃ |
|
|
Storage/transportation temperature |
-40℃~+85℃ |
|
|
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|
|
Industrial Standard |
||
|
EMS |
Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us） Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV（10/700us） RS：IEC 61000-4-3 80 MHz-1 GHz：10 V/m EFT：IEC 61000-4-4 4K/2K CS：IEC 61000-4-6 10V ESD：IEC 61000-4-2 Contact: 8K；Air: 15K |
|
|
EMI |
FCC Part 15B Class A |
|
|
Shock |
IEC 60068-2-27 |
|
|
Free fall |
IEC 60068-2-32 |
|
|
Vibration |
IEC 60068-2-6 |
|
|
Certification |
CCC/CE/FCC/RoHS |
|
|
Warranty |
5 years |
|
|
Model |
Description |
|
SY-IS6210XGP-2XS8GT |
Managed industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 2*1G/2.5G/10GBase-X SFP+ slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |