Model
SY-IS6520XG-4XS8GX8GT series
Overview
The SY-IS6520XG-4XS8GX8GT series are the highly reliable Layer 3 managed industrial Ethernet switches with 8-port 10/100/1000Base-T RJ45, 8-port 100/1000Base-X SFP and 4-port 1G/2.5G/10GBase-X SFP+. With full gigabit downlink and 10G uplink capability, they can provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. They support DI/DO/RS485/Modbus data, G.8032 ERPS, MSTP/RSTP/STP redundancy technologies, Layer 3 static routing & dynamic routing features, powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
SY-IS6520XG-4XS8GX8GT series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, including redundant power supply with DC12-75V input, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 80 °C as well as high-level EMI/EMC capability. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 8*10/100/1000Base-T RJ45, 8*100/1000Base-X SFP, 4*1G/2.5G/10GBase-X SFP+
➢ 12-75V redundant DC power supply with polarity reverse/over-voltage/over-current protection
➢ Support USB one key configuration & upgrading and DI/DO/RS485/Modbus data
➢ Layer 3 feature: Support static routing and dynamic routing
➢ Layer 2 features: VLAN; ERPS, STP/RSTP/MSTP; Link aggregation, IGMP snooping, port mirroring, QinQ,
802.1X, port isolation, RMON, NTP client, DHCP snooping/client, Ping/Tracert test, ACL, QoS and SFP DDM function
➢ Management and maintenance: IPv4 and IPv6 management; Support Web, SNMP, CLI, Telnet/SSH management method;
Support user management, system log, configuration upload/download through web interface, firmware upgrade via HTTP/TFTP/USB
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+ 80 ℃
Specification
Model No. |
SY-IS6520XG-4XS8GX8GT/SY-IS6520XG-4XS8GX8GT-D |
|||
Interface |
1G/2.5G/10G Fiber ports |
100/1000 fiber ports |
10/100/1000M RJ45 |
|
4 |
8 |
8 |
||
Ethernet |
8*10/100/1000Base-T RJ45 8*100/1000Base-X SFP (1-8 ports) 4*1G/2.5G/10GBase-X SFP+ (17-20 ports) |
|||
Management port |
1*RJ45 Console port,1*USB 2.0 for configuration and firmware update |
|||
Data channel(optional) |
1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) |
|||
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10GBase-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP |
|||
LED Indicators |
||||
P1/P2 (Power indicator)Green |
Off:the device is power off or failed |
On: the device power on is normal |
||
SYS (System status indicator) |
Blinking: device initialization |
On: device on normal operation |
||
USB (USB status indicator)Green |
Off: USB flash drive not insert or not detected by device |
|||
On: USB flash drive is detected by device |
||||
Blinking: the device is reading and writing the data from USB flash drive |
||||
ALM(Fault status indicator)Red |
Off: Device on normal working state |
On: Fault alarm |
||
Ring(Ring network indicator) |
Off: Ring network disable |
On: Ring network enable |
||
9-16(Copper ports indicators)Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
9-16(Copper speed indicators) Yellow |
Off:ports on 10/100M |
|||
On:ports on 1000M |
||||
1-8/17-20(Fiber ports indicators)Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
Power parameter |
||||
Input voltage |
12-75VDC redundant power input |
|||
Input current |
2.5A DC/DC input Max |
|||
Total power consumption |
Full loading ≤27W |
|||
Connector |
Removable2-pin terminal block |
|||
Reverse polarity protection |
Support |
|||
Over-voltage protection |
Support |
|||
Over-current protection |
Support |
|||
Layer 2 function |
||||
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support dynamic aggregation |
|||
Port features |
Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage |
|||
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|||
VLAN Classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
|||
QinQ |
Port-based QinQ VLAN-based QinQ Flow-based QinQ |
|||
Port mirroring |
Many to one port mirroring |
|||
Ring network protocol |
Support STP、RSTP、MSTP Support G.8032 ERPS protocol,single ring, sub Ring and associated sub ring Recovery time ≤20ms |
|||
DHCP |
Support DHCP Client Support DHCP Snooping |
|||
Multicast |
IGMP V1,V2,V3 IGMP snooping |
|||
ACL |
IP Standard ACL MAC extend ACL IP extend ACL |
|||
QoS |
Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS |
|||
Security |
Support Dot1x,port authentication,MAC authentication,RADIUS service Support port-security Support IP Source Guard,IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation |
|||
Management &maintenance |
Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping , TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading Support USB upgrading Support USB importing configuration |
|||
Layer 3 function |
||||
ARP |
ARP table aging |
|||
IPv4 / IPv6 |
Static routing |
|||
ECMP |
ECMP; Support the configuration of ECMP Max next-hop; Supportcapacity balanced configuration; |
|||
Route policy |
IPv4 prefix-list |
|||
VRRP |
virtual router redundancy protocol |
|||
Routing entry |
13K |
|||
IP routing protocol |
RIPv1/v2; OSPFv2; BGP4; BGP supports Routing recursive ECMP; Support to view the number of neighbors and up/down state IS-ISv4 |
|||
Switching features |
||||
Switching capacity |
112Gbps |
|||
Packet forwarding rate |
166.6Mpps |
|||
MAC address table |
16K |
|||
VLAN |
4K |
|||
Buffer |
12M bit |
|||
Forwarding delay |
<5us |
|||
Jumbo Frame |
Support 10Kbytes |
|||
MDX/MIDX |
Support |
|||
Watchdog |
Support |
|||
Mechanical structure |
||||
Case protection |
IP40 |
|||
Installation method |
Din-rail |
|||
Dimension(W*D*H)mm |
105*115*158mm |
|||
Weight |
SY-IS6520XG-4XS8GX8GT: 1.8kg; SY-IS6520XG-4XS8GX8GT-D:1.9kg |
|||
Operating environment |
||||
Operating temperature |
-40℃~+ 80℃ |
|||
Storage/transportation temperature |
-40℃~+ 85℃ |
|||
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|||
Industrial Standard |
||||
EMS |
Surge protection of power: IEC 61000-4-5 DC:6KV/6KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 power 4K, signal 2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
|||
EMI |
FCC Part 15B Class A |
|||
Shock |
IEC 60068-2-27 |
|||
Free fall |
IEC 60068-2-32 |
|||
Vibration |
IEC 60068-2-6 |
|||
Certification |
CCC/CE/FCC/RoHS |
|||
Warranty |
5 years |
|||
Model |
Description |
SY-IS6520XG-4XS8GX8GT |
Layer 3 managed industrial Ethernet switch with 4*1G/2.5G/10GBase-X SFP+ ports , 8*100/1000Base-X SFP and 8*10/100/1000Base-T RJ45 ports. DualDC 12-75V input,Din-rail installation; Operation temperature -40°C to 80°C |
SY-IS6520XG-4XS8GX8GT-D |
Layer 3 managed industrial Ethernet switch with 4*1G/2.5G/10GBase-X SFP+ ports , 8*100/1000Base-X SFP and 8*10/100/1000Base-T RJ45 ports. Support DI/DO/RS485/Modbus; DualDC 12-75V input,Din-rail installation; Operation temperature -40°C to 80°C |