4*10/100/1000Base-T PoE+ 2*100/1000Base-X +DI/DO/RS485/Modbus Managed Industrial PoE Switch
SY-IS6206GP-2GX4GT-D
Overview
The SY-IS6206GP-2GX4GT-D is a highly reliable industrial managed PoE Switch with 4-port 10/100/1000-T PoE and 2-port 100/1000Base-X fiber optical interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port.It supports DI/DO/RS485/Modbus data and USB one key configuration and upgrading. SY-IS6206GP-2GX4GT-D also supports layer 2 managed functions, such as QoS, VLAN, IGMP, Port mirroring, 802.1X, STP, RSTP, G.8032 ERPS, LLDP, Fiber transceiver DDM, PoE management, IPV6 management and so on.
SY-IS6206GP-2GX4GT-D is also high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.
Features
➢ 4*10/100/1000Base-T RJ45 PoE ports, 2*100/1000Base-X SFP ports
➢ DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Support USB one key configuration and upgrading
➢ Support DI/DO/RS485/Modbus data
➢ Support Layer 2 management function:VLAN/Port Mirroring/IGMP/QoS/LLDP/802.1X/Fiber transceiver DDM
/PoE management/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Specification
|
Model No. |
SY-IS6206GP-2GX4GT-D |
|
|
Interface |
Fiber ports |
Copper RJ45 ports |
|
2 |
4 |
|
|
Ethernet |
4*10/100/1000Base-T RJ45 PoE 2*100/1000Base-X SFP |
|
|
Management port |
1*RJ45 Console,1*USB 2.0 for configuration and upgrading |
|
|
Data channel |
1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) |
|
|
Standard |
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control and back pressure IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree protocol IEEE 802.1Q VLAN tagging ITU-T G.8032 ERPS IEEE 802.1X port authentication network control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af Power Over Ethernet IEEE802.3at Power Over Ethernet plus PSE |
|
|
LED Indicators |
||
|
P(Power indicator) Green |
Off:the device is power off or failed |
Off:the device is power off or failed |
|
S(System status indicator) |
Blinking: device initialization |
On: device on normal operation |
|
1-4(Copper ports） |
Green |
Yellow |
|
Off：ports link down |
Off: PoE not working |
|
|
On: ports link up |
On: PoE working |
|
|
Blinking:data on TX/RX |
|
|
|
5-6（fiber ports）Green |
Off: ports link down |
|
|
On: ports link up |
||
|
Blinking:data on TX/RX |
||
|
Power parameter |
||
|
Input voltage |
44-57VDC, redundant power input |
|
|
Input current |
3A Max |
|
|
Total consumption |
Full loading without PoE ≤6W PoE Power budget ≤120W |
|
|
Connector |
Removable 4-pin terminal block |
|
|
Reverse polarity protection |
Support |
|
|
Over-voltage protection |
Support |
|
|
Over-current protection |
Support |
|
|
Layer 2 function |
||
|
Port aggregation |
Support static aggregation Support dynamic aggregation |
|
|
Port features |
Support IEEE802.3x flow control, Support Port traffic statistics Support port isolation Support network storm suppression based on port bandwidth percentage |
|
|
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|
|
Port mirroring |
Support many to one port mirroring |
|
|
Ring network protocol |
Support STP、RSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms |
|
|
Multicast |
IGMP V1,V2,V3 IGMP snooping |
|
|
QoS |
Ingress Port-based Rate-limit Egress Port-based Rate-limit |
|
|
Security features |
Support 802.1x，port authentication，MAC authentication，RADIUS service Support port isolation |
|
|
Management and maintenance |
Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support Ping , Tracert Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support PoE management Support TFTP, web upgrading |
|
|
Switching features |
||
|
Switching capacity |
12Gbps |
|
|
Packet forwarding rate |
17.8Mpps |
|
|
MAC address table |
8K |
|
|
VLAN |
4K |
|
|
Buffer |
1M bit |
|
|
Forwarding delay |
<5us |
|
|
Jumbo Frame |
Support 10Kbytes |
|
|
MDX/MIDX |
Support |
|
|
Watchdog |
Support |
|
|
Mechanical structure |
||
|
Case protection |
IP40 |
|
|
Installation method |
Din-rail |
|
|
Dimension(W*D*H)mm |
54*115*158mm |
|
|
Weight |
1.27 kg |
|
|
Operating environment |
||
|
Operating temperature |
-40℃~+75℃ |
|
|
Storage/transportation temperature) |
-40℃~+85℃ |
|
|
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|
|
Industrial Standard |
Surge protection of power: IEC 61000-4-5 6KV/4KV（8/20us） |
|
|
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV（10/700us） |
||
|
RS：IEC 61000-4-3 80 MHz-1 GHz：10 V/m |
||
|
ESD: IEC 61000-4-2 Level 4（8K/15K） |
||
|
EMI:FCC Part 15B Class A |
||
|
Shock：IEC 60068-2-27 |
||
|
Free fall：IEC 60068-2-32 |
||
|
Vibration：IEC 60068-2-6 |
||
|
Certification |
CCC/CE/FCC/RoHS |
|
|
Warranty |
5 years |
|
|
Model |
Description |
|
SY-IS6206GP-2GX4GT-D |
Managed industrial PoE switch with 4*10/100/1000Base-T PoE ports and 2*100/1000Base-X SFP slots, supports DI/DO/RS485/Modbus, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+75℃ |